Winston Industries PF56C Wartungshandbuch PDF herunterladen (Seite 160)

14.

15.

16.

17.

18.

Replace vent spring securing weight lifter to solenoid bracket. Vent spring is mounted

between notch in top of vent solenoid bracket and hole in weight lifter arm.

NOTE: Utilize care in preventing spring

from

twisting when replacing.

If twisted, undue

tension produced could result in a chattering noise and pressure reduction during cook

cycle.

Manually depress and release weight

lifter several times to ensure smooth

unrestricted travel prior to reassembly.

Replace the four (4) screws securing vent

assembly to rear of fryer. NOTE: Vent

tube must protrude through vent assembly

at lease 1/2" (See Figure 23).

Connect the two (2) solenoid wires to

harness wires.

Place O-ring over vent tube and slide back

against vent assembly.

CAUTION:

Prior to applying final torque to screws in Step 19,verify solenoid wires are not

pinched between nut plate and vent assembly. This could create a shorted

circuit causing potential equipment damage and/or personal injury.

19.

Place vent block on vent tube, line up nut plate behind vent assembly and replace the four

(4) *crews securing block onto vent tube and vent assembly.

20.

Drop vent ball (if applicable) down through waffle onto vent block.

21.

Place weight down in weight lifter.

22.

Place vent back onto vent assembly.

23.

Replace the seven (7) screws securing back panel and Danger Label panel to rear of fryer.

24.

Place

muffler

onto vent back and place unit back into service.

REPLACE VENT TUBE (ITEM NO. 56)

Tools:

Slotted Screwdriver; Phillips Screwdriver #2; Silicone Sealant; Open End Wrench

- 13/16"

Procedure:

DANGER: Turn off electrical power and disconnect electrical power supply. If unit is

hardwired, CIRCUIT BREAKER MUST BE OFF.

FIG. 23

WINSTON

LIT.6710/REV.0/9-91

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 306 307

Kommentare zu diesen Handbüchern

Keine Kommentare

Winston Industries PF56C Wartungshandbuch Seite 160

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Friteusen Winston Industries PF56C